Equipment

To ensure better usability and ease of use, I can offer you the suitable hardware solution so that you can focus on what matters in the competition.

H001 - USB-Device (only android)

The product contains the following components:
  • Plastic case with USB cable to connect to the device.

    As of now, this article is no longer made from PLA but from ABS plastic.
    Note! ABS plastic is not as sensitive to heat as PLA and therefore does not risk being deformed by heat.

inputs / outputs:
  • input - Trigger (H005)
  • input - Sensor-Kit
 
Accessories:
  • OTG-Adapter Type-C
  • OTG-Adapter Micro
 

Note: Product and picture may vary.

Description:


This product is a specially developed and manufactured USB-Device which will help you to operate the software while driving. For the necessary power supply, you have to connect the hardware to your smartphone or tablet so that you easily can stop your period by trigger without losing track on road.
ATTENTION! It is not possible to use a different power supply than your smartphone / tablet.

Depending on the device (USB port) one of the above two adapter is included in the price.
The USB key works:

  • Android smartphone from version 4.1 and USB-host function.
  • Android Tablet from version 3.1 and USB-host function.

H005 - Trigger

    As of now, this article is no longer made from PLA but from ABS plastic.
    Note! ABS plastic is not as sensitive to heat as PLA and therefore does not risk being deformed by heat.
Note: Product and picture may vary.

Description:

This product is a specially developed and manufactured trigger that is intended to make it easier for you to operate the software while driving. This product can be connected to any device shown here with a trigger input, so that you can easily and conveniently stop your time without losing track of the road.

H003 - Sensor - Kit

The product contains the following components:  
  1. Magnet (2x magnets + 2x double-sided adhesive pads)
  2. Sensor
  3. Holder
  4. Cable connector
  5. Extension Cable 5m
Note: Product and picture may vary.

Description:

For even more accurate distance measurements you should purchase the sensor kit. As you can see on picture 1 and 2 a magnet (signaler) is attached to the inside of the rim and the magnetic sensor (signal receiver) placed on the suspension. The cable connector (D) needs to be attached to the housing of the Bluetooth-case input-2. Each time the magnet passes a signal to the magnet sensor during the drive output which processes the software and will thus enables more accurate distance measurements.

H007 - Photocell - Kit

The product contains the following components:  
  • Photocell
  • Holder
  • Cable connector
Accessories-optional:
  • 2x photo tripod
  • Plastic housing for 8x 1.5 volt batteries or rechargeable batteries (batteries not included)

Note: Product and picture may vary.

Description:

This photocell kit can be connected to all devices with a trigger input, so that the passage time can be recorded precisely.
This kit, in conjunction with my app "C4Timerkeeper", it can be used very well for all race organizers.
Here are the photocell properties:
Sensing method:    Retroreflective
Detection distance:    4m±10%
Sensitivity adjustment:    Adjustable
Supply voltage    :    12-24Vdc
Response time    :    30ms max
Operating temperature:    -30 to 65 °C (with no icing or condensation)  

H008 - Bluetooth-device with 8 trigger-inputs (iOS)

Trigger models:
  1. Plastic case with compartment for 9V battery (battery not included)

    As of now, this article is no longer made from PLA but from ABS plastic.
    Note! ABS plastic is not as sensitive to heat as PLA and therefore does not risk being deformed by heat.
inputs / outputs:
  1. input - USB-power
  2. On off switch. The 9V battery, if present, is used as emergency power.
  3. Input - Trigger (H005)

 
Note: Product and picture may vary.

Description:

This device can only be used with the app StopWatch-4-All. This can be served to 8 stop / lap timer. It is very useful when a race, with a maximum of 8 participants, must be timed.

H009 - USB-Trigger (only android)

The product contains the following components:
  • USB-Trigger
    Differences with H005-triggers:
    1. It can be connected directly to the windows-device via USB cable.
Accessories:
  • OTG-Adapter Type-C
  • OTG-Adapter Micro

 
Note: Product and picture may vary.

Description:


This product is a specially developed and manufactured USB-Device which will help you to operate the software while driving. For the necessary power supply, you have to connect the hardware to your smartphone or tablet so that you easily can stop your period by trigger without losing track on road.
ATTENTION! It is not possible to use a different power supply than your smartphone / tablet.

Depending on the device (USB port) one of the above two adapter is included in the price.
The USB key works:

  • Android smartphone from version 4.1 and USB-host function.
  • Android Tablet from version 3.1 and USB-host function.

H012 - Bluetooth-Device (Android & iOS)

The product contains the following components:
  • Plastic case with compartment for 9V battery (battery not included)

    As of now, this article is no longer made from PLA but from ABS plastic.
    Note! ABS plastic is not as sensitive to heat as PLA and therefore does not risk being deformed by heat.
Inputs:
  • Input - Trigger (H005)
  • input - Sensor-Kit
  • input - USB-power
  • On off switch. The 9V battery, if present, is used as emergency power.

 

Note: Product and picture may vary.

Description:


For even better ergonomics you can alternatively purchase the Bluetooth-Device on the USB key(which is only for Android devices).
With the Bluetooth-device you can connect your smartphone or tablet to the charger to have available the full battery all along. The Bluetooth-Device can be connected to the same or a separate charger.

Only with this product, can an external button, for operating the app connected. Here also, the sensor-kit can be connected. Thus, the distance traveled and the speed can be measured much more accurately than with GPS only.

ATTENTION - Android!
This product requires Android 4.3+ and Bluetooth 4.0+!
Please check before purchase, if it is supported by your device. The check can be done with my Regulatory apps - The function can be found under the menu: "BLE-Checker".

ATTENTION - iOS!
Since GPS is only available on iOS devices (iPhone and iPad) with a phone function, all my regularity apps can only be used with this product.

This device works with any Android and iOS device - all you need is a Bluetooth interface.

H013 - USB-Device (only Windows)

The product contains the following components:
  • Plastic case with USB cable to connect to the device.

inputs / outputs:
  • input - Trigger (H005)
  • input - Sensor-Kit
 

Note: Product and picture may vary.

Description:

This product is a specially developed and manufactured USB-Device which will help you to operate the software while driving. The product has an input for a trigger and a sensor kit.
Simply connect the product to your Windows device with the included USB cable and you can stop your time immediately with the trigger(H005) without losing sight of the road.
And if you connect my "sensor-kit", you can measure the distance covered with an accuracy of one meter and always have your current speed with you.

H014 - USB-Trigger (only Windows)

The product contains the following components:
  • USB-Trigger
    Differences with H005-triggers:
    1. It can be connected directly to the windows-device via USB cable.

 
Note: Product and picture may vary.

Description:


This product is a specially developed and manufactured USB-Device which will help you to operate the software while driving.
Simply connect the product to your Windows device via USB and you can stop your time immediately without losing sight of the road.

H015 - Bluetooth & Radio-Receiver-Device (Android & iOS)

The product contains the following components:
  • Plastic case with compartment for 9V battery (battery not included)
    and a USB cable for the power supply.

    In addition to all the functionalities of H012, the device also has a radio function.
    It can connect to several radio transmitters (see "H016 - Radio-Transmitter").
Inputs:
  • Input - Trigger (H005)
  • input - Sensor-Kit
  • input - USB-power
  • On off switch. The 9V battery, if present, is used as emergency power.

 
Note: Product and picture may vary.

Description:


This product is the evolution of product H012.
Of course, all the features of H012 are also present in this product.
However, this device also has a radio receiver function with which makes it connect at the same time with several radio transmitters (see "H016 - Radio-Transmitter") and evaluate the reception.
The combination of radio receiver and radio transmitter can be used to create a test environment for Oldtimer Rallye; interesting not only for private classic car drivers but also for Oldtimer Rally organizer.
The radio range between the radio receiver and the radio transmitter is approximately 100 meters.

H016 - Radio-Transmitter

The product contains the following components:
  • Plastic case with compartment for 9V battery (battery not included).
Inputs:
  • Trigger (H005), Photocell - Kit (H007), ...
  • On off switch

 
Note: Product and picture may vary.

Description:


The device is a radio transmitter that automatically connects to a radio receiver (see "H015 - Bluetooth & Radio-Receiver").
Here you can connect a button, a photocell or other; the signal is sent to the radio receiver.
The combination of radio receiver and radio transmitter can be used to
create a test environment for Oldtimer Rallye; interesting not only for private classic car drivers but also for
Oldtimer Rally organizer.
The radio range between the radio receiver and the radio transmitter is approximately 100 meters.

Price List Accessories  

Article no. Product name   price
H001 USB-Device 80,50 € *
H003 Sensor-Kit 44,50 € *
H005 Trigger-Professional 38,00 € *
H007 Photocell - Kit 55,00 € *
H007 Photocell - Kit with 2x photo tripod 105,00 € *
H008 (iOS) H008 - Bluetooth-device with 8 trigger-inputs (iOS) 99,50 € *
H009 USB-Trigger 54,50 € *
H012 (Android & iOS) Bluetooth-Device 99,50 € *
H013 (Windows-10) USB-Device 75,50 € *
H014 (Windows-10) USB-Trigger 50,50 € *
H015 - Bluetooth & Radio-Receiver Bluetooth & Radio-Receiver 120,50 € *
H016 - Radio-Transmitter Radio-Transmitter 55,50 € *
shipping price price(shipping insurance)
Germany - 9,50 Euro
Europe (EU) - 19,50 Euro
For other countries please inquire.
* All prices are exclusive of shipping costs.
For all purchase modalities please contact: fil1503@gmail.com
As a freelance developer, I am not bound on sales tax.

Copyright © 2020 by Filippo-Software